BigTymer
Registered
First off thanks to everyone for all of the great information that is posted daily on the board. I am not new to the board, but new to posting. Not only am I new to posting, but I decided to try my hand at working on the bike this weekend. Full exhaust is where I started. I got the old off and started to put the headers on (tsukigi) and used the liquid gasket. Of course I had to leave the house before I was done and the liquid gasket set up before I got it tightened down.
Suggestions? Should I sand off and then reinstall and do I even need the liquid gasket...I replaced the gaskets as well.
Thanks
Mike
Suggestions? Should I sand off and then reinstall and do I even need the liquid gasket...I replaced the gaskets as well.
Thanks
Mike