Pit Bull 13
Registered
I have a gen II and the 195 little bulb fell out into the housing the two in the top corners.. how do you get it out? is there a trick to it? i dont wanna take off the whole plastic's lease: theres a way to do it.. thanks
get a retractable pen/magnet and just retrieve it thru the bulb hole. The one with the fingers and magnet at the end like mechanics use.
another stupid idea-maybe something like a rubber flexible hose, fuel tubing or something similar, about 1/2" diameter, tape/rig it up to a shop vac. Maybe if u taped the tube tight enough to the shop vac hose it would have good suction and suck that baby right up when u fish it through the light
chewed bubble gum on a stick?
i have a 6k hid hi and low beam set for 100 shipped i you want it, 713-292-8871.. i tired to sell it months ago on here but nobody needed them i guess. if you are interested i can send u a pic. sorry to hear about your mishaps.I thought of that but i dont want it to hit the lens and have bb gum stuck ti the inside of my head light.. Im gonna try a few other ideas you fellow orgsters poasted up..
I ha a really bad yesterday.. was driving home from Va and my car broke down in west Va took me 5 hours to fix on the side of the road with no tools. so i didnt get home till 3 Am and now my busa bulb issue with that problem added another.. my HID 6000k high beam dosnt work and I cant find where to get a replacement bulb I dont remember if its diamond white eather.. bad 24 hours
Put her up on the back wheel and it'll fall out
- Biaggi[/url]
very easy, 2 bolts on the outer edges-10mm, wiggle the whole cluster out of the grommets, then from the clutch side of the bike un-plug the harness that plugs into the cluster. Be very careful not to scratch the lenses of the gauges, lay a towel or rag over them if need be