bertiebusapilot
Registered
HOW DO I ADJUST MY HEADLIGHT THE MAIN BEAM IS VERY GOOD BUT DIP BEAM IS SADLY LACKING
HEADLIGHT
- Thread starter bertiebusapilot
- Start date
there are two little screws for each one... it's hard to explain with words.. if you have your owners manual it shows you where they are..
the easiest way is to remove that black fairing piece thats under the headlamp and nose fairing.. pop those little clips and it comes right out. Then you can lay on your back with a short screw driver and adjust till your hearts content... the good news is the low beam is pretty easy to get to.. while the high is... harder.
the easiest way is to remove that black fairing piece thats under the headlamp and nose fairing.. pop those little clips and it comes right out. Then you can lay on your back with a short screw driver and adjust till your hearts content... the good news is the low beam is pretty easy to get to.. while the high is... harder.
