Hayabusa turbo - stainless butterflies ?

[busabiker888888]

No timing pulled, 10psi,98 octane.

 

[busabiker888888]

Hello Powerhouse ! Make some pulls in higher gears, 4/5 gear today,(spring is here)then afr get high afr13.5 -14 Didnt show up in 1 and 2 when i bendt my blades. Thank you helping me outIts time too remap before meltdown

 

[mysticblu999]

Schnitz has them too. Ive bent a few before

 

[scrappy]

I would like to know where to get the screws for the butterfly valves, i jacked two of them up while removing the set.
I have also heard that replacing these screws is better than reusing them because they become compromised once removed.
I checked the busa microfiche (gen 1, 2006) and apparently Suzuki doesn't have a part number on these screws.. at least i couldn't find any..

 

[Gixer]

For me, the bent upper side of butterflies, outwards (in the direction of the air box)