Package #1
Stock Motor Streetable Kit Package (This kit is for the daily rider that wants to do the occasional track day or bust his friends up on the street/track without motor sounding to radical)....Kit
includes:
Stock Motor Specs-Rods,tranny
Stock Bore Cylinder-Pistons
Cylinder Head Port Work-Guides,65lb Springs,Street port
Cams with Sprockets-Hotter than Stock Units
Special Oiling Upgrades-Internal and baffles
Gaskets/Seals
Hp TRW should be in the 170-185 range.
All Parts,Labor,Tuning and setup included-$2100
Add Custom Dry nitrous kit with Controller-$3000
Add a complete custom Nitrous Wet Kit and Controller-$3700
Shipping-$200 return-unless picked up
Kit with a 80 shot has been 8.5x's at 68" with 162lb rider.average rider should go low 9's - high eights...
------------------------------------------------------------------------
Package #2
1363 Motor Streetable Kit Package(This kit is for the daily rider that wants to take total advantage of his friends and get those unsuspecting rookies at the track lunch money)....Kit
includes:
Stock Motor Specs-Rods,tranny
1363 Bore Cylinder with JE 11.5 to 1 Pistons
Cylinder Head Port Work-Guides,65lb Springs,Race Port,Studs
Street Spec Cams with Sprockets
Special Oiling Upgrades-Psi Valves,oil pump gear,baffles
Gaskets/Seals
Adjustable Cam Chain tensioner
Hp TRW should be in the 185-200 range.
All Parts,Labor,Tuning and setup included-$3500
Add Custom Dry nitrous kit with Controller-$4400
Add a complete custom Nitrous Wet Kit and Controller-$5100
Shipping-$200 return-unless picked up
Kit with a 80 shot should net you low to mid eights with good rider
------------------------------------------------------------------------
Package #3
1397 Motor Streetable Kit Package(This kit is for the daily rider that wants to take total advantage of his skills at the track and make alittle money while doing it on or off the track..)....Kit
includes:
Stock Motor Specs-Rods
Heavy Duty output shaft on tranny
1397 Bore Cylinder with Thicker Wrist pinned Pistons
Cylinder Head Port Work-Guides,65lb Springs,Race Port,Studs
Web Grind Spec Cams with Sprockets
Special Oiling Upgrades-Psi Valves,oil pump gear,baffles
Gaskets/Seals
Adjustable Cam Chain tensioner
Complete rebearing of motor,and compression can be adjusted at customer's request.
Hp TRW should be in the 200-225 range.
All Parts,Labor,Tuning and setup included-$5000
Add Custom Dry nitrous kit with Controller-$5900
Add a complete custom Nitrous Wet Kit and Controller-$6600
Add Rods-$1000 ----(not required or included in prices below)
Shipping-$200 return-unless picked up
Kit with a 80 shot should net you low eights with good rider
------------------------------------------------------------------------
Package #4---THA BIG PAPA
1397 with 5mm Stroker Motor Kit Package --1507 cc of pure power
Not recommended for the streets
(This kit is for the serious rider that wants to take total advantage of his skills at the track and make his friends and naysyers walk off with their heads down.This kit is not for the faint or weak at hearted rider.)....Kit
includes:
Carrillo H Beam Rods Required
Heavy Duty output shaft on tranny
1397 Bore Cylinder with Thicker Wrist pinned Pistons
Cylinder Head Port Work-Guides,65lb Springs,Race Port,Studs
Web Grind Race Spec Cams with Sprockets
Special Oiling Upgrades-Psi Valves,oil pump gear,baffles
Gaskets/Seals
Adjustable Cam Chain tensioner
Complete rebearing of motor,and compression can be adjusted at customer's request.
Hp TRW should be in the 235-250 range.
All Parts,Labor,Tuning and setup included-$7900
Add Custom Dry nitrous kit with Controller-$8800
Add a complete custom Nitrous Wet Kit and Controller-$9500
Shipping-$200 return-unless picked up
This kit all motor went 8.5 at 60"inches--possible high 7 pass with spray...currently west coast record all motor package at 60"..
This bike was ridden by Joe England(the builder of these motor kits)..he has ridden and built some of the fastest machines on the west coast..and holds numerous records..
All heads stock valves,all packages will use stock fuel system,will upgrade it before shipping back to customer..Bigger CC package kits available..Motor exchange available also at additional cost..We will also offer outright sales in the future.all work can be tested and proven at the track in front of you if you fly in to see it tested..all cost are at your expense except lodging,you are welcomed at my place.
Post your questions here or call Daniel at 888-959-3278 for more info,you can also send pm or email
Stock Motor Streetable Kit Package (This kit is for the daily rider that wants to do the occasional track day or bust his friends up on the street/track without motor sounding to radical)....Kit
includes:
Stock Motor Specs-Rods,tranny
Stock Bore Cylinder-Pistons
Cylinder Head Port Work-Guides,65lb Springs,Street port
Cams with Sprockets-Hotter than Stock Units
Special Oiling Upgrades-Internal and baffles
Gaskets/Seals
Hp TRW should be in the 170-185 range.
All Parts,Labor,Tuning and setup included-$2100
Add Custom Dry nitrous kit with Controller-$3000
Add a complete custom Nitrous Wet Kit and Controller-$3700
Shipping-$200 return-unless picked up
Kit with a 80 shot has been 8.5x's at 68" with 162lb rider.average rider should go low 9's - high eights...
------------------------------------------------------------------------
Package #2
1363 Motor Streetable Kit Package(This kit is for the daily rider that wants to take total advantage of his friends and get those unsuspecting rookies at the track lunch money)....Kit
includes:
Stock Motor Specs-Rods,tranny
1363 Bore Cylinder with JE 11.5 to 1 Pistons
Cylinder Head Port Work-Guides,65lb Springs,Race Port,Studs
Street Spec Cams with Sprockets
Special Oiling Upgrades-Psi Valves,oil pump gear,baffles
Gaskets/Seals
Adjustable Cam Chain tensioner
Hp TRW should be in the 185-200 range.
All Parts,Labor,Tuning and setup included-$3500
Add Custom Dry nitrous kit with Controller-$4400
Add a complete custom Nitrous Wet Kit and Controller-$5100
Shipping-$200 return-unless picked up
Kit with a 80 shot should net you low to mid eights with good rider
------------------------------------------------------------------------
Package #3
1397 Motor Streetable Kit Package(This kit is for the daily rider that wants to take total advantage of his skills at the track and make alittle money while doing it on or off the track..)....Kit
includes:
Stock Motor Specs-Rods
Heavy Duty output shaft on tranny
1397 Bore Cylinder with Thicker Wrist pinned Pistons
Cylinder Head Port Work-Guides,65lb Springs,Race Port,Studs
Web Grind Spec Cams with Sprockets
Special Oiling Upgrades-Psi Valves,oil pump gear,baffles
Gaskets/Seals
Adjustable Cam Chain tensioner
Complete rebearing of motor,and compression can be adjusted at customer's request.
Hp TRW should be in the 200-225 range.
All Parts,Labor,Tuning and setup included-$5000
Add Custom Dry nitrous kit with Controller-$5900
Add a complete custom Nitrous Wet Kit and Controller-$6600
Add Rods-$1000 ----(not required or included in prices below)
Shipping-$200 return-unless picked up
Kit with a 80 shot should net you low eights with good rider
------------------------------------------------------------------------
Package #4---THA BIG PAPA
1397 with 5mm Stroker Motor Kit Package --1507 cc of pure power
Not recommended for the streets
(This kit is for the serious rider that wants to take total advantage of his skills at the track and make his friends and naysyers walk off with their heads down.This kit is not for the faint or weak at hearted rider.)....Kit
includes:
Carrillo H Beam Rods Required
Heavy Duty output shaft on tranny
1397 Bore Cylinder with Thicker Wrist pinned Pistons
Cylinder Head Port Work-Guides,65lb Springs,Race Port,Studs
Web Grind Race Spec Cams with Sprockets
Special Oiling Upgrades-Psi Valves,oil pump gear,baffles
Gaskets/Seals
Adjustable Cam Chain tensioner
Complete rebearing of motor,and compression can be adjusted at customer's request.
Hp TRW should be in the 235-250 range.
All Parts,Labor,Tuning and setup included-$7900
Add Custom Dry nitrous kit with Controller-$8800
Add a complete custom Nitrous Wet Kit and Controller-$9500
Shipping-$200 return-unless picked up
This kit all motor went 8.5 at 60"inches--possible high 7 pass with spray...currently west coast record all motor package at 60"..
This bike was ridden by Joe England(the builder of these motor kits)..he has ridden and built some of the fastest machines on the west coast..and holds numerous records..
All heads stock valves,all packages will use stock fuel system,will upgrade it before shipping back to customer..Bigger CC package kits available..Motor exchange available also at additional cost..We will also offer outright sales in the future.all work can be tested and proven at the track in front of you if you fly in to see it tested..all cost are at your expense except lodging,you are welcomed at my place.
Post your questions here or call Daniel at 888-959-3278 for more info,you can also send pm or email