Gen 1 Buell foot peg mod
- Thread starter KEVBUSA
- Start date
They are for me. I’ve had them on my bike for years. Put them on to favor my right ‘crash’ knee that doesn’t like to bend very much especially in the cold. They’re lower than stock, about as low as possible with the stock mid pipes. I forget what I paid for them.
+1
These typically come in a 25mm or 40mm drop(roughly an inch and inch and a half)
I'm going to put a 40mm drop set on my Gsxr1000, and on it's passenger pegs.
Even that small amount takes a little bend out of the knees, and drops the feet enough to notice...and I tend to drag drop pegs in fun corners...but I'm more comfortable doing it.
lol
These typically come in a 25mm or 40mm drop(roughly an inch and inch and a half)
I'm going to put a 40mm drop set on my Gsxr1000, and on it's passenger pegs.
Even that small amount takes a little bend out of the knees, and drops the feet enough to notice...and I tend to drag drop pegs in fun corners...but I'm more comfortable doing it.
lol
My size 12s tend to touch down before anything else.
I'm not sure about corners with dropped pegs, especially since i'm already riding -2in dogbones. my poor knees though (6'2" all in the legs)
Yes
Cruising180
Registered
Any idea if they'll fit the Gen3?
Not sure, that would be a question for the experts here.
