USMCRET2015
Registered
Ladies & Gents I have a 2004 Busa is it at all difficult to change out the clutch/hydraulic line?
Clutch
- Thread starter USMCRET2015
- Start date
Lucid
Registered
^^ Yep. Things to keep in mind:
Don't get the fluid on any paint, as it will eat through.
Set the cover over the reservoir as you are bleeding. Fluid might squirt out of the reservoir as you pull the lever.
Replace crush washers around the new line.
Consider a clutch slave support if you're having issues with leaking near the clutch slave cylinder.
Consider checking/replacing front sprocket while you've got everything taken apart.
Don't over-torque the screws on the reservoir.
Don't get the fluid on any paint, as it will eat through.
Set the cover over the reservoir as you are bleeding. Fluid might squirt out of the reservoir as you pull the lever.
Replace crush washers around the new line.
Consider a clutch slave support if you're having issues with leaking near the clutch slave cylinder.
Consider checking/replacing front sprocket while you've got everything taken apart.
Don't over-torque the screws on the reservoir.
Similar threads
