05+ GSXR forks on 1st Gen.s

[JusPlaynBob]

Mother of God!..
..thats a beautiful picture.

Thanks everyone for all the work in this thread.

It should be pinned for reference purposes later.

I've tried coping and pasting most of this thread.

No doubt I'll be doing some type of this mod.

Likely the GSXR750 forks.

Anyone want to sell forks, calipers, and wheel, as a whole unit?

Special thanks to Suzuki4Life!

 

[atticdog]

does anyone here make the 5mm spacers for the calipers?

 

[atticdog]

Im in the middle of doing this mod

04 gsxr 1000 forks
07 gsxr wheels/rotors
07 gsxr calipers
wheel spacers from antdog600

and it looks like I need to space the rotors abit wider
only feket663 mentioned this in his posts on the first page of this thread

 

[kairles]

I also plan on doing this mod with 03-04 1k forks and brembo M/C. I've found some great deals on ebay but had to pass on them. the 05+ forks seem to easier to find.

 

[busa ash]

hi guys i am nearly done on this conversion ,i have 02 busa with gsxr 1000. 06 forks 07 gold brakes busa wheel busa rotors , 0.5mm shim in lower busa tree , 15 mill brake spacers ,new brake hoses, radial master cylinder gsxr radial, had ordered off e bay a gsxr 06 front axle with center thread right side ... but i have just read on another site that i can use an 08 /09 busa axle and spacer to complete the conversion ?

 

[turbobusa2000]

Not sure. I just swapped the front end off a 08 busa. It was a direct swap. Good luck.

 

[#Braaap@Life]

View attachment 1270265

I need a kit for 01 busa