Recent content by jamhulsey

It's true, that was before I cleaned out the tank so either gunk from the old gas got back in the new injector screens or it's an unrelated issue. I'm thinking possibly fuel regulator if not the injectors. The bike shop said they serviced a 2012 Busa with the same problem and the only thing hat...

Bike shop in town said I'm running on 2 cylinders. Hopefully it just gummed up injectors.

Supposed to say Busa has no power, autocorrect did some kinda wizardry.

i just got my 06 Busa running from it sitting for over 5 years. It idled fine and I've changed all the fluids, plugs, and injectors as well as cleaned out the gas tank and fuel pump. When I got on to ride it today I gunned it and I got a moped style take off. No spin, no front wheel lift. Just a...

Turned out to just be the idle screw. She's running great now. No smoke, just a smooth beautiful idle. Can't wait to get her back on the stree. Thanks for the help gentlemen. Gonna keep my eye out for a plastic clip to replace the wire but it'll do for now.

Update: I replaced the overly expensive plastic bracket that holds the fuel regulator with a metal wire. It has a strong hold. Bike fired right up. Barely even smoked, one problem. It jumped straight to 4000 rpms and stayed there. inahut it off after about 20 seconds. Fuel map possibly messed up?

Just left the Suzuki dealer. They want $329 for the assembly with the plastic clip. My plastic clip is gone. Have no idea where unless it wedged down in the tank. Think I could rig a bracket?

Long story short, the bike sat for several years while I was overseas. Now that I'm back in the US I broke it out and started trying to get it back in shape. It won't start so today I pulled the fuel tank and fuel pump out to see if they were gummed up. They looked pretty clean, but as I was...

The bike will not start with the zero maps installed and Pcv disconnected either

I think the original maps from the pc3 are what damaged the starting process. That's why I linked the Pcv on the post as well. The ECU could likely be damaged.

Used to, not anymore now it just turns over and backfires

The bike wont start with the Zero map either. Not sure why, it has been in storage for over a year. I changed the plugs when I got it out could it need something new in the fuel system?

I put a power commander III on my bike in the past and didn't map it correctly. The bike would crank but would only stay running if I held the throttle open. I've switched to a PCV and now the bike wont start (no longer have the PC3). It turns over but, only backfires instead of starting. I then...