FYI ... Hayabusa engine being used in off road vehicle.
Started fine about 6 months ago and has never had issues starting at all and has been running great for a long period of time in general. Sat in a shop most this time waiting for some fabrication/frame welding work. It tries to turn over like it always has and sounds normal. No signs of any popping or really any sign of it trying fire. Almost like no fuel, spark, or similar. Put in new spark plugs and verified have spark. Drained all fuel and replaced. Fuel pump seems to be working fine and my gauge shows about 50 PSI when cranking. Opened fuel pump line and seems like plenty of flow out of my Aeromotive fuel filter and I replaced the filter inside it just incase. Checked for loose wires, disconnected sensors, etc. All fuses I can locate are good. If I step on gas pedal when cranking it has no change in sound or anything. I do not get the FI light or codes when cranking on the LCD. Anything obvious to check ... I feel like it is something simple I am overlooking. How do/can I verify if getting fuel to cylinders?
Thanks for any input ...
Started fine about 6 months ago and has never had issues starting at all and has been running great for a long period of time in general. Sat in a shop most this time waiting for some fabrication/frame welding work. It tries to turn over like it always has and sounds normal. No signs of any popping or really any sign of it trying fire. Almost like no fuel, spark, or similar. Put in new spark plugs and verified have spark. Drained all fuel and replaced. Fuel pump seems to be working fine and my gauge shows about 50 PSI when cranking. Opened fuel pump line and seems like plenty of flow out of my Aeromotive fuel filter and I replaced the filter inside it just incase. Checked for loose wires, disconnected sensors, etc. All fuses I can locate are good. If I step on gas pedal when cranking it has no change in sound or anything. I do not get the FI light or codes when cranking on the LCD. Anything obvious to check ... I feel like it is something simple I am overlooking. How do/can I verify if getting fuel to cylinders?
Thanks for any input ...