Winter mods plan......

delboy

God save the Queen.......
Donating Member
Registered
Planning the following mods over winter:

1) Brembo brake calipers all round.
2) Cyclops undertray.
3) Gilles Chain adjuster (Black).
4) Gsxr 1000 wheels.

Question is performance mods to the engine, my bike at the moment makes 166 rwhp / 102 ftlbs. Looking for a little more power, say 10-15 hp, will only ride twisties and track days, so big bore, Nos and turbos are out, but which way to go.

1) Just the exhaust cam change, what will this give guys.

2) High Lift Cams set, should give more than 1) ???

2) Gas Flowed Head including 3 angle cut seats etc. Reprofiled High Lift Camshafts including adjustable sprockets.

Would like to get your learned opinion on the best bang per $$$$$

Delboy says thanks:bowdown:
 
In my opinion, you need to think about bumping the compression a bit in combination with the cams.

I had some of the same goals in mind when I did mine last winter.

oldvsnew1.jpg
 
Last edited:
Thanks Rick, so that gain was with a cam change and 13:1 pistons on a stock bore:beerchug:
 
Back
Top