GSX1300RSILVER
Registered
Can you get a turbo that is mild ?
One that could ad as little as 20hp?
One that could ad as little as 20hp?
Will a Turbo be able to DIAL Down to 180hp ish?
- Thread starter GSX1300RSILVER
- Start date
Johnnycheese
Registered
hahahahahahahahahahaha
just get a dry shot if that is all you want
I beleive the min. at 6# is like 240HP
sorry that is not what a turbo is for
GSX1300RSILVER
Registered
Tire Roasting fun at 240HP,
would be cool though if you could dial down a little farther
than 240HP.
would be cool though if you could dial down a little farther
than 240HP.
GSX1300RSILVER
Registered
What mods have you done?You can get a stocker to push 175-178 ish, if that helps ya out!
Mine is 178RWHP with little to no mods.
ICE
And what amount of $$$ ?
Puck
Registered
You should install a super charger like the one in the movie Mad Max. The car had an on/off switch for the super charger...
:bounce:
Milwaukee_Joe
Registered
GSXR1300Silver....what kind of dyno are you running on??? cause the braked dyno that I run on simulates actually power on the road...not under no load like some dyno's
hayaboosta
Registered
I just added Yoshimura stage 1 cams, small box mod, PCIIIR and .010" off the head with the BDE GEN III pipe. It pulled 180rwhp at the Dynojet R&D facility in Vegas.
The only way to get that small of an amount of HP from the turbo would be to open the wastegate. But, like forementioned...Why?
The only way to get that small of an amount of HP from the turbo would be to open the wastegate. But, like forementioned...Why?
Thing I don't quite understand is why spend 4 or 5k on 20 hp anyways.......add a pipe, PC, filter, box mod and Yosh drop ins and you'll spend roughly half that and put out 180+ hp.
I guess maybe you want the ability to increase HP as needed.
Similar threads
