will a busa fit in an S10 pickup?

[crepitus]

I think it should with the gate down. just double checking.

 

[DR1300R]

Should if you leave the tailgate down..

 

[MET]

Tailgate down yes. Measre one to be exact. You need about 81 inches.

 

[fstbusa]

fits in a shortbox full size truck with gate down...

hauled it to ohio like that.

 

[7th Gear]

I used an S-10 with the gate down when I bought it. No problem. You will need a 6"X6"X1' piece of lumber in front of the bed so the Busa front fender doesn't touch the glass. Good luck

 

[shimmyz]

Here is a pic of my busa in a Nissan frontier with a 6 foot bed. Yes, you will need a block of some sort so the fender doesn't rub. I used a piece of 2X6 so the fender didn't hit the front of the bed when the bike was strapped down. I believe a 2X6 is 1.5 inches thick. That gave me about a 1/4 inch gap between the fender and the bed.

 

[suzuki4life]

Here is a pic of my busa in a Nissan frontier with a 6 foot bed. Yes, you will need a block of some sort so the fender doesn't rub. I used a piece of 2X6 so the fender didn't hit the front of the bed when the bike was strapped down. I believe a 2X6 is 1.5 inches thick. That gave me about a 1/4 inch gap between the fender and the bed.

where ya located stranger?

 

[shenoyp]

 

[BA BUSA]

 

[shimmyz]

where ya located stranger?

About 90 miles north of Pittsburgh. Punxsutawney area