Where can I find the pins that go into the stock connectors from a 2006?

[yzguyfl]

Where can I find the pins that go into the stock connectors from a 2006?
It is the connector that you come to if you follow the wires from the hi/low beam switch on the left handle bar.

The previous owner removed a few pins to rewire it to use the pass button for the nitrous. I want to wire it differently so I have my high beams back.

 

[GoldenChild]

post a pic and i might can sell you a pig tail or the connectors with length of wire to solder in for correcting it..

 

[1 wheel peel]

If GoldenChild can't help check here. VStrom
Just because it's not listed doesn't mean he don't have it. I have bought stuff from him before for making plug n play items. $20 min order though......

 

[yzguyfl]

I need the male part, and the spade part is about 2.1 mm wide.

the pigtail with the short wire is what I need 2 of.

 

[yzguyfl]

I ended up getting a broken switch with harness from eBay and cut 2 wires off that. So if anyone else needs a couple of pins I may be able to help u out.