Upper clamp triple tree

justtight

Modified and Broke
Donating Member
Registered
<a href="http://cgi.ebay.com/ebaymotors/Suzuki-Hayabusa-GSX1300R-Top-Clamp-Triple-Tree-Upper_W0QQitemZ220075202170QQihZ012QQcatego
ryZ35591QQrdZ1QQssPageNameZWD1VQQcmdZViewItem" target="_blank">Link</a>

Does this look right? Most of the ones I've seen are like $175 to $200
 
That's just a stock piece.....the ones that are $150-250 are the after market ones that allow you to lower the front end.

Spencer
 
Quick question couldnt someone looking to lower the front just drill out the stock top clamp allowing the upper fork tubes to pass through?
 
(05BusaLe @ Feb. 28 2007,19:14) Quick question couldnt someone looking to lower the front just drill out the stock top clamp allowing the upper fork tubes to pass through?
No because u end drilling into the mounts. I had a buddy who did the mod and reweld it on. Looked good but broke when he strap down the bike.
 
Check this one out, I have worked with one before and it looks awesome in person. I posted a DIY with one of these somewhere.

here is the part


here is the DIY
 
Get the reapers risers and lowerr away. If you want an aftermarket one see Streetntrack .
 
Back
Top