I will have a new fuel controller out soon with a map senser(3 Bar) built into it,also you can add extra fuel injecters and you can set your fuel pressure at 1 to 1.
No FMU (Junk)
No Power camander (Junk)
Load based!!
No more 275HP in 6 gear and 260HP in second gear!!
You will have 275HP in every gear!!
With the 1320straightliners Pro, you are in control.
1320straightliners Pro is a highly configurable system designed to meet the needs of professional tuners – its GenIII controller can be programmed to work with boost, supplemental injectors, and Nitrous, as well as manipulate sensors. The 1320straightliners Pro takes load based tuning to the next level, continuing to build upon the stock ECU map while giving you an expansive set of tuning tools.
Features:
Load based tuning
Web based interface (Windows PC with USB required)
Fuel adding with Stealth Technology
Currently available for 2 and 4 cylinder engines, 6 and 8 cylinder coming soon.
Pressure - boost based fueling and sensor manipulation
Supplemental injector control - up to 2 additional injectors
Nitrous system control
Two sensor manipulation circuits on 2 and 4 cylinder models, four on 6 and 8 cylinder applications.
Abilities:
Voltage Generation
Voltage Offset
Voltage Clamp
O2 "simulated" closed loop
Uses:
O2 manipulation "spoofing" - sending a fake O2 signal to the ECU under boost.
Sensor clamping - limiting the maximum voltage signal a sensor sends to the ECU Fuel injector duty cycle display
I will start a whole new post on this new controller
www.1320straightliners.com Burt