TPS wire and tach wire location

[johnnycrash]

I've got the Schnitz racing TPS/RPM window switch to activate my solenoid. All the wiring is figured out except for two things. The switch needs an input from my TPS wire and the Tach wire.

Where is the best place to tap into these wires?

Thanks!

 

[johnnycrash]

Tach: white wire with blue tracer - on RH ECM plug as sitting on bike.

TPS: middle wire coming out of TPS - verify by checking volts while bike is running. Voltage varies from .1 to almost 5 V according to throttle position.

Thanks to smugly, dkariores, and Extremefun on this!

 

[Professor]

And thanks for posting the answers for my future reference!

 

[Sangai]

Very Nice ! will come in handy soon

 

[BLACK051K]

(johnnycrash @ Oct. 26 2006,07:37) I've got the Schnitz racing TPS/RPM window switch to activate my solenoid.  All the wiring is figured out except for two things.  The switch needs an input from my TPS wire and the Tach wire.  

Where is the best place to tap into these wires?

Thanks!

Yellow w/blue tracer.... ECU Tach signal
Pink w/black tracer........TPS signal