Taillight intergrator

[ralnsplder]

I have a 04 busa and am tring to install a tail light integrator for my under tail. The problem is that I have to use LED bulbs in order to have red brake lights. The lends are clear. When I try to use the LED bulbs, the signals blink really fast, when I put my original bulbs in, it slows back down to normal. Can someone please tell me what i'm doing wrong or how to fix this? I cannot find regular bulbs that are red, so red LEDS were the only thing that I could think of.

 

[arey]

Your not doing anything wrong.Led bulbs don't have enough resistance. Here is a link that johnnycheese answered which fixes that problem.





<!--EDIT|arey
Reason for Edit: None given...|1093903574 -->

 

[ralnsplder]

Thanks for th info, I'll try that tonight.

 

[hyyaqt]

You have to change the blinker module. A word of caution though, before you go cutting your wire harness....I might have bought a bad integrator or something, but when I would get down on the throttle, I had a problem with my tail lights going completely out! Strange problem, but I had to take out the LEDs and go with a regular bulb and a red cover on the bulb from AutoZone.