Stripped threaded hole

[bird1300]

I bought a roaring toys lowering triple tree from ballzmotorsports and installed it on my bike. The problem is I over torqued one of the bolts and stripped out the hole on the pinch bolt that holds the bar. What would you all recommend to fix my problem? Thanks in advance!

 

[GIXERHP]

Heli coil!

 

[moko]

Maybe drill it through, and use a bolt nut all the way through.... Or drill amd retap one size bigger if enough room

 

[jeffgordons24]

Heli coil as said will work or drill and tap with a slightly larger bolt.
I had this same concern with the roaring toys triple so I would up going with the BALL Z one which uses the bolt as a key way. You can also reach out to @Ball Z Motorsports they are amazingly knowledgeable and helpful.

 

[RedBull]

Maybe drill it through ,
and use a bolt nut
all the way through . . .

Or drill and retap
one size bigger
if enough room .