Stock-Piped-Ported

[8secBusa]

Here are my progressions:
158 Bone Stock 158
169 Pipe & PC 169
198 Ported head, 378/330 cams, 13.1 pistons

 

[run-4-cover]

aren't you the guy running 8's still stock bore? If so, good job! can you list your mods? I'm aiming for the 200rwhp stock bore mark myself.

 

[8secBusa]

I am the guy SHOOTING FOR 8"s on stock bore. Last year I bested 9.42 at 145. Since I have added 378/330 cams, 13 to 1 pistons, and had the head ported. It gained 25-30hp on the dyno, if I can ride this thing, it should be capable of 8.8-8.9's.

I just had the bike out yesterday. It freaking flys!!! 1st-3rd gear it roast the tire. Track opens in 3 weeks, I am geared up!!!

 

[Benzo_tek]

Good luck at the track!!!!!

 

[BATTMAN]

Is the bike still streetable with the high compression. Im thinking about going this route too.

 

[BATTMAN]

I see that you are in Maryland. Where did you get the head work done at?

 

[8secBusa]

FBR did the motor work. Give Marion a shout 410-374-1000.
Great shop, finished the bike as promised, on schedule!!!
They are racers. Sponsor races, and are at most bigger events mounting tires and providing technical support (while going rounds).

I am running 92 octane, on my second tank. Plugs look great, no signs of detonation.

 

[bisquit61]

Hey..I'm geared up for you. I'm looking forward to seeing what that combination runs. Let us know as soon as it happens. Good Luck..

 

[bdogg317]

Here are my progressions:
158 Bone Stock 158
169 Pipe & PC  169
198 Ported head, 378/330 cams, 13.1 pistons

your #'s are interesting im at 164 with tsughi, pciii, air box mod. I will be doing a port and polish next and im hoping to see 192-194