Stator Cover

[Jay boogie]

I changed out my stator cover put everything back as it should now my bus a won't start. It won't even turn over

 

[Valingt]

do the lights come on? did you check you fuses?

 

[Jay boogie]

Yes I'm getting ready to take it off again and check connections

 

[GIXERHP]

Make sure you didn't pinch the Crank trigger wires under the clamp!

 

[GIXERHP]

Also you plugged both connectors back in,,, correct?
The black large 3 pin. and the small 2 pin?

 

[David Offor]

That 30 amp fuse under the riders seat, which seems to blow? If it's not even cranking over, sounds like it could be that, does the starter try to engage, do the needles swing round on the clock, can you hear the fuel pump prime?
What year is the bike? Gen 1 or 2?

 

[Jay boogie]

Gen

That 30 amp fuse under the riders seat, which seems to blow? If it's not even cranking over, sounds like it could be that, does the starter try to engage, do the needles swing round on the clock, can you hear the fuel pump prime?
What year is the bike? Gen 1 or 2


Its a gen 1. And no the needles don't move

 

[Jay boogie]

Gen

I can hear the pump prime

 

[David Offor]

Do you know where the 30 amp fuse is under the riders seat? I've read posts on this site, about them blowing.

 

[Jay boogie]

I don't I have read post about it but don't know exactly where

 

[GIXERHP]

If the Bike cranks and gauges work the Fuse is good. That fuse is the main, but you have power!

Have you checked the Ignition fuse under the left dash panel in the fuse box?

 

[Jay boogie]

The bike does not crank and the gauges do not work. The lights do though

 

[GIXERHP]

Then check the Ignition fuse under the left dash panel. If it was the main, you would NOT have lights!

The bike does not crank and the gauges do not work. The lights do though

 

[Jay boogie]

Ok thank you I will check that