Small air box mod question


Busa Bill

Donating Member
Registered
#1
Hello
I have a question ,when you do the small air box mod you cap the one side to the throttle body which I understand that but you trace that back to a valve which is called a Vacuum control solenoid valve which is located on the frame.
do you remove this valve ? its not being used anymore, because you have capped it off ,I like things clean looking in the engine area and instead of having loose lines caped off and laying around I would rather remove them if i could .and the valve if needed to stay for one reason or another do you cap it or leave it open .Im referenceing page 4-23 in the service manual. any help would be great.
 

BA BUSA

MotoGP Wannabe
Donating Member
Registered
#3
The valve also connects to the ECU...if you remove it you might get a trouble code (FI light would come on)
rock.gif


You might try PMing Johnnycheese...he would know
wink.gif
 

Busa Bill

Donating Member
Registered
#5
Got ahold of Johnnycheese and this is what he said.

chuck it and you have now an extra 12volt power source
for something(but bump the ingition fuse if you add
something big)
 
#6
(Busa Bill @ Aug. 21 2006,18:07) Got ahold of Johnnycheese and this is what he said.

chuck it and you have now an extra 12volt power source
for something(but bump the ingition fuse if you add
something big)
I'm doing this mod now.

Any pics of what you took off and where you finally capped the line?
 

Most likes - Past 7 days

Forum statistics

Threads
170,750
Messages
3,070,433
Members
46,844
Latest member
sarpe
Top