? Regarding Clutches

[Ham]

Me and a buddy are in a debate regarding the Gen2 hayabusa clutch plates, he thinks they can go in - in any order he says they are all the same.

But i believe they go in- in a certain order.

can a clutch expert verify the correct way.
Pics, a write up or any info would help.
Thanks.

 

[Dennis]

First and last fibers are unique and must go in their spots. All the other fibers are the same. The steels are the same except they come in two thicknesses. Normally you need three thick steels, the rest thin. Suzuki says to install the thick ones toward the center of the stack, favoring the inside of the bike. Steels should be installed with radiused corners in. Last fiber is rotated one groove offset from the rest.