Rear Footpeg Mounts After Changing to 4 Into 1 Exhaust.

lightemup

Registered
I was just wondering what there is out there for aftermarket rear footpeg mounts after switching from stock exhaust to a 4 into 1 R-22 Yoshimura system? The left side doesn't need to hold onto a muffler any more, so is there something out there for that? Your help will be greatly appreciated. Thanks.
 
they also make some covers to dress up the hole a little. Or, If you plan on powder coating or chrome I actuall like to cut off the exhaust hanger and smooth it out with a die grinder before it goes out for chrome.
 
here's mine, :thumbsup:

08212011 006.jpg


08212011 001.jpg
 
I've also seen people cut it off and just smooth it out

+1
I still have both mufflers, but I cut off the hooks on mine before having them powdercoated.
The muffler mount could've been removed the same way.
I just bandsawed them off and smoothed with a fine tooth file. The aluminum is very soft and cuts and smooths easily.:beerchug:

SDC10497.jpg
 
+1
I still have both mufflers, but I cut off the hooks on mine before having them powdercoated.
The muffler mount could've been removed the same way.
I just bandsawed them off and smoothed with a fine tooth file. The aluminum is very soft and cuts and smooths easily.:beerchug:

Lube your chain much? Lookin a bit crusty there bro:poke:
 
Back
Top