Rear Brake Resoviur

[Nec ozzi]

Ever wonder where it is?Its nearly impossible to access it without lifting or removing the tail section.It's easy to remove.I changed to dot 5 in my clutch and front and rear brakes.Flushed out first with denatured alcohol. I also changed the clutch to kevlar with heavy duty springs and I got a slave cylinder support bracket.Bit all this time I thought the front brake resoviur took care of the rear brakes too.

 

[Marc]

Only removing the hole tail man...

 

[ZBusa350]

I didn't have to remove the tail when I put new fluid in. I just had to pry away the plastic and wedge something in there to hold it back while I replaced the fluid.

 

[busafan08]

I didn't have to remove the tail when I put new fluid in. I just had to pry away the plastic and wedge something in there to hold it back while I replaced the fluid.

That s what I do to

 

[Marc]

Pictures please!

 

[sixpack577]

A gen2 tail can be removed in 2-3 minutes.
Not a big deal.
Handful of bolts and push-pins, unhook seat latch cable, lift it off, done.

 

[fallenarch]

Put on an aftermarket brake res. End of problem.

 

[bigoltool]

Put on an aftermarket brake res. End of problem.

But where are you going to put it that isn't hidden by the bodywork?

 

[Vanishing Point]

But where are you going to put it that isn't hidden by the bodywork?

example
https://www.hayabusa-service.de/en/...luminum-rear-brake-reservoir-busa-99-07-short

 

[Vanishing Point]

Long version.
https://www.hayabusa-service.de/en/...aluminum-rear-brake-reservoir-busa-99-07-long

 

[Vanishing Point]

http://www.saeoutlawperformance.com/Billet-Rear-Brake-Reservoir-B108.htm