1. Folks we are working on the server and doing some upgrades so you might see some lag or downtime today. we will get this back up asap
    Dismiss Notice

Rcc Quick Access Clutch Cover And Tiwinder

Discussion in '1/4 Mile' started by sjg34, Sep 5, 2016.


  1. sjg34

    sjg34 Registered

    Contests won:
    0
    Messages:
    262
    Location:
    Wichita, KS
    Is anyone using an RCC quick access clutch cover and a tiwinder? Did you have any clearance issues between the two components?
    Thanks
     
  2. Dennis

    Dennis Registered

    Contests won:
    0
    Messages:
    934
    Can't answer that specifically, but wouldn't surprise me. I have a different cover and sidewinder and I had to make a short spacer for the rear mount to lower it to clear.
     
  3. sjg34

    sjg34 Registered

    Contests won:
    0
    Messages:
    262
    Location:
    Wichita, KS
    The way my bracket is if I add a spacer it will push it out and up. I am guessing I will need to make a new hangar to the foot peg or maybe flatten one of the bends in the hangar. How tight was your before the spacer?
     
  4. sjg34

    sjg34 Registered

    Contests won:
    0
    Messages:
    262
    Location:
    Wichita, KS
    Dennis if you don't mind me asking what type of clutch are you running?
     
  5. Dennis

    Dennis Registered

    Contests won:
    0
    Messages:
    934
    Yea, new hanger is a better description of what I made. Mine was rubbing. I had to add about an inch to the hanger.

    I'm running a Rock clutch in my main bike, and a stock clutch in my slow bike.
     

Loading...

Share This Page