RC Components Aurora race wheels




gsxr1216

Registered
Rear is 17x6.25 with cush drive, it has been modified with a beadlock setup that widened it to 6.5" 190/50/17 hookup tire on it, comes with sprocket and rear rotor. You will most likely need to make new spacers as the ones in this wheel were made to fit a Mcintosh extended arm. Wheel is straight, needs a 15 minute date with a can of mothers aluminum polish to look like brand new again. A few small marks in them, you can see them in the pics.

Front 17x2.75 with a 120/60/17 tire that has maybe 200 miles on it. Comes with front axle and brake rotor. This one also needs a little polishing to look like new and they have been sitting in my basement for 2 years. This wheel is not as straight as the rear, I have had 3 sets of RC Comp front race wheels over the years and for some reason it seems to be about impossible to get one thats mint on runout. It has about .030" of runout on the diameter, and about .040" on the side, some of it is most likely the tire. i have videos of both wheels spinning on a stand so you can see the small bit of runout on the front and the rear being pretty close to perfect for a RC wheel. I can send them to interested partys.

Looking for $1500 + shipping for the pair, not going to separate the tires from the wheels, or separate the front from the rear. The beadlock modification alone was $750.

1604039


1604039


1604040


1604041


1604042


1604043


1604044


1604045


1604046


1604047


1604048


1604049


1604050
 



Latest Bikes

Forum statistics

Threads
172,871
Messages
3,092,840
Members
47,698
Latest member
GuiGold
Top