r1 throttle

[dirty dave]

I just put the R1 throttle on and had to adjust my cables all the way down and the re adjust the Idle a little bit is that normal?

 

[DR1300R]

Yes... That is normal.

 

[suzuki4life]

I used the r6 on my busa.

 

[Mr Bogus]

not sure why the idle would need adjusted unless you have one of the cables a bit on the tight side (or the old one was) they should both be slack at idle..

 

[dirty dave]

There is a little slack very little and the adjuster at the bracket and throttle housing are all the way down, meaning I cant get anymore slack in the cables.

 

[busa9218]

any difference by changing the throttLe???

 

[dirty dave]

Way quicker throtle response, tricks you into thinking the bike is faster just gets to wide open faster

 

[busa9218]

Way quicker throtle response, tricks you into thinking the bike is faster just gets to wide open faster

hmmm dats hw sportsbike throttLe react, might wans to chg to dat too...any

idea wats the price like??

 

[Commuta_Busa]

you use an OE yamaha throttle tube. In the US they're about $7 to $12USD.

hmmm dats hw sportsbike throttLe react, might wans to chg to dat too...any

idea wats the price like??

 

[shahrul_azmil3]

i can't seems to fit my r6 throttle tube .....

any help ?

it seems there's not freeplay ... n the tube need to modify ...

 

[quizesilver]

hmm
why using R6...
we are using R1 nt R6....

 

[Commuta_Busa]

you can use either one. one is slightly more aggressive than the other.

hmm
why using R6...
we are using R1 nt R6....

 

[SLEEPERBUSA]

hmm
why using R6...
we are using R1 nt R6....

The R6 is even quicker than the R1 throttle.

 

[busa9218]

do i juz buy the cables or the whole throttle ???

 

[SLEEPERBUSA]

Only the plastic throttle sleeve that fits over the bar and the grip comes with it.
Use the Busa cables.

 

[busa9218]

thnx for the reply

 

[Dweezel]

any certain years?

 

[SLEEPERBUSA]

Best $17 mod - quick throttle