Apollonick
Registered
Have a zx10 problem. This is the jist of it.
Hey so I have a gen 1 2005 zx10r. It was leaking oil from valve covers badly so I took it apart when my rearset broke and replace coils spark plugs and valve gasket. Put everything back together correctly attached battery and soon as I turned the key the ecu fuse blows and I get no gauges or cluster but I can flip the kill switch and crank the bike. Because ecu fuse blew it won't start fully if anyone has any advice I cannot see anything out of ordinary with wiring or damage. Everything is wrapped and taped still and nothing looks pulled riped or crunched. I have found the ecu fuse box wires and found which wires lead into the ecu plug and have checked a wiring diagram. Still lost.
Hey so I have a gen 1 2005 zx10r. It was leaking oil from valve covers badly so I took it apart when my rearset broke and replace coils spark plugs and valve gasket. Put everything back together correctly attached battery and soon as I turned the key the ecu fuse blows and I get no gauges or cluster but I can flip the kill switch and crank the bike. Because ecu fuse blew it won't start fully if anyone has any advice I cannot see anything out of ordinary with wiring or damage. Everything is wrapped and taped still and nothing looks pulled riped or crunched. I have found the ecu fuse box wires and found which wires lead into the ecu plug and have checked a wiring diagram. Still lost.
