Quick ABS question

[BusaBenny]

Hello everyone. I have a 2017 Hayabusa with ABS. I need to bleed the brakes. Is the process any different then a 2008 with no ABS? Thanks

 

[RedBull]

 

[c10]

No different except brembo bleed valves are a pain to access. Make / bend a custom 12 point wrench for the job.

 

[ottafish]

Is the abs pump open at rest?

I assumed there'd be some procedure to open the valves to allow bleeding?

Something else I just learned today.

 

[c10]

Is the abs pump open at rest?

I assumed there'd be some procedure to open the valves to allow bleeding?

Something else I just learned today.

No bleed points on abs. Get the Sawzall out, and remove the abs. Then one will be happy

 

[RedBull]

#c10Bryan ~ #IronButtBryan *

 

[BusaBenny]

Thank you guys for all you’re help. It looks I just bleed it the same way as non-abs.

 

[BusaBenny]

I might disconnect the battery to be safe.

 

[Dopey]

After watching the video Brian made the other night and actually seeing the abs module it reminds me of the early Chevy abs modules that you needed the scanner to activate and bleed out the module. And honestly the way the stock lever feels with a quick double pump is the same as when you'd have to pump the brakes in the chevys. So knowing there isn't a bleed point on the module is there a way to activate and bleed it? Just seems like a good place to get an air bubble stuck to me. Just a curiosity question.

 

[Kiwi Rider]

Cut off this guys arms and he’d be speechless, totally overboard on the hand gestures and annunciations

 

[Sandow]

Cut off this guys arms and he’d be speechless, totally overboard on the hand gestures and annunciations

I think you are just jealous because he has the nicer accent....