Questions on heli bar install

dober

Registered
Hey guys I have a few questions on the install of my heli bars.
I rerouted the choke cable as per the instructions but the other wires on the left bar seem very tight when turned to the right,is this normal?The angle of the bars seem alittle off,
The right bar looks like its a little lower compared to the left
bar, is this normal?



thanks
 
You can rotate bar in the clamp a little... It will change angle and lower/rise the bar.
You can pull wires up a little as well.
 
i also use a bar riser i ran the cable under the top clamp then under the tank mounting bolts in the front. i used a wise strap to hold to the bolt under the front of the tank, i think it is a air box bolt. it worked out perfict and looks like they did it that way. if need be i can talke a pic and post it tomarow.:cool:
 
1 of 4 hope they help no bind this way

2006_03050001.JPG
 
Where can I get those black caps you have on there...covering the adjusters for the front forks?

Please pm me, I will forget that I posted in this thread, - thanks!
 
Back
Top