Question on Front lowering block

[DEMMYM]

Hey I just want to make sure I have this right.

All I have to do is remove the 4 bolts on the upper triple tree, Lift it up, Place the lowering block in place, set the tripple tree on top of the block and replace with longer bolts.

Correct. ???

 

[fiend]

Yep and then when you want to lower it you loosen the pinch bolts on the bottom upper clamp.

 

[DEMMYM]

It is installed.

===================================================================

 

[turbosdad]

What kind of levers do you have and do they hit your fairing. Do you think that a GPR V4 steering damper would work with your lowering?????

Thanks

 

[Fastfrog007]

looks good michael How about the rear?, soupy's if i recall correct.

 

[Strife]

Be sure to check the clearance of the brake and clutch lines. Like when you get on it and the front end fully extends.
also,when/if you choose to lower the front. Don't let the tubes slide all the way up until they rest on the top clamp. It will transfer vibration.

Looks great!

 

[DEMMYM]

looks good michael How about the rear?, soupy's if i recall correct.

You are correct.

 

[DEMMYM]

What kind of levers do you have and do they hit your fairing. Do you think that a GPR V4 steering damper would work with your lowering?????

Thanks

I have aftermarket Tribal Cut Chrome Levers, There close but do not hit.

Not sure about the Damper