Question about TPS in ECU editor

[ColdBusa]

Hey guys,

I just got my ECU editor and I hooked it up so I could have a look and noticed something. When my throttle is released, the throttle position is at -1.2%. When I open the throttle all the way, it shows 94.5%. I didn't have it running for the engine data, just the key and kill switch turned on. Also, it's only about 8oC in my garage, so I'm not too sure if that throws off the sensors a bit.


Anyways, I was just wondering if these values will straighten themselves out once I fire up the bike. If not, should I calibrate the TPS?

One thing to note is I forgot to hook up the laptop to the PCV to see what it says for the TPS.

Thanks in advance.

 

[maXmood]

IMO, those are the correct or near correct readings.. TPS isn't set to 100% as WOT (you probably can make it open 100%), and at closed throttle it would probably be 1% or part of it, but not 0%..

 

[ColdBusa]

ok. The other thing is that the engine wasn't warm either, so that might have thrown off the sensor a bit.

 

[maXmood]

ok. The other thing is that the engine wasn't warm either, so that might have thrown off the sensor a bit.

it will be at the same opening levels even if the engine is running and warmed up..