Picture Request "Under Tank"

[MOCKIN U]

I have my girl stripped down to the frame and ready to take off to powder coat and Im planning its reassembly. Of every picture that I took in the process I did not get a good picture of the rubber hose lines that go to all the sensors on the left side of the frame if looking at the motor from back of the bike. Could you guys post pictures you have of your Gen 1 bikes with the air box off and the upper part of the engine. I have two hoses that came undone and Im almost 98% sure I put them back into right place when I set the engine up on an old tire to sit but just wanna make sure. THX!

-Kelley

 

[MLSDUKE1]

If you have the maintenance manual it will show you exactly where they go OR you could go to Motorcycle Parts, Motorcycle Accessories by BikeBandit.com and look under their OEM section and it will show you a breakdown of where everything goes (microfiche)

 

[MOCKIN U]

TY! didnt think of that

 

[VFRcanada]

There's a bunch of pictures here that might help.