Panel warning lights

[Red baron]

Hi guys.
I'm building a hayabusa gen 1 quad and I'm using a Maxx ecu, with a tablet, and not the clocks, so I need to install some warning lights, I guess they are
Neutral
Oil pressure
Left indicator
Right indicator
Low beam
High beam

FI Light will be on the tablet

I can't think of any more, but just though I would ask just incase I have missed the obvious

Many thanks

 

[Mr Brown]

I'd run a gauge for oil pressure, (an idiot light only tells you something bad has already happened) and if the high beam isn't on, the low beam is, so you can skip those 2.

 

[Red baron]

Ok, didn't think of that, the ecu will allow me to have an oil pressure gauge, so can do it that way.

 

[Red baron]

Due to the lights on the quad, I woukd be running side lights during the day, so wouid think I need to keep those two

 

[Mr Brown]

Due to the lights on the quad, I woukd be running side lights during the day, so wouid think I need to keep those two

There is no low beam indicator on the US models, the low beam is always on. Is the UK bike different?

 

[Kiwi Rider]

How about having a low fuel warning lamp?
Also, a fuel pressure gauge is good to have if you can fit that in.

 

[Red baron]

There is no low beam indicator on the US models, the low beam is always on. Is the UK bike different?

To be honest I don't know, will have to watch some more videos to see. I can't plug the clocks in now as the looms away being modified

 

[Red baron]

How about having a low fuel warning lamp?
Also, a fuel pressure gauge is good to have if you can fit that in.

I have a fuel sender in a bespoke tank, so will have a fuel guage on the dash
Fuel pressure guage, I coukd probably get the dash to show that someway, as the fuel pressure regulator is separate now