no oil pressure after rebuild

[tanker]

Hi, hope some one can help after having engine rebuilt put back in filled with oil, plugs out, cranked over on starter oil light wont go out, is there a way to prime the oil pump with out taken back out or engine covers off, maybe through one of the oil cooler fitting maybe?

 

[Commuta_Busa]

pull the clitch out and spin the oil pump gear.

 

[O Holy P]

After you make sure the gear is present along with the rest of the pump.

 

[Nicholas]

did u put the wire back on the oil pressure sensor on the bottom of the engine, ive done that and the oil light wont go off.... ever... lol i didnt realize what i did till i took the engine back out the second time to do some upgrades

 

[dave3.4]

I wouldnt risk it and would pull the clutch out and spin the oil pump with a drill

 

[dave3.4]

also did you clean out your oil pickup when you rebuilt it?

 

[GIXERHP]

I wouldnt risk it and would pull the clutch out and spin the oil pump with a drill

+1
Thats the best insurance!