No brake lights on gen2

[aussiesuzukirider]

I have searched the forum and could only find problems fixed because the brake lights were on and the sensors were adjusted to fix the problem. Mine are not coming on at all i have checked everything, fuses, sensors. switches but nether the front or rear brake will light up, is it possible the the led's in the tail assemble could have died or is it something else, thanks for your help guys.

 

[Joker]

Did you check to see if you are getting power to the brake lights? And that will be at the connection to the led?

 

[Tufbusa]

Start at the tail light and work backwards.

 

[aussiesuzukirider]

I'll take it off and check those things, was late last night and didn't want to pull it apart.

 

[aussiesuzukirider]

Ok did the voltage test and looks like the tail light has had a fail the volts spike when you apply the brakes.

 

[dmallord]

hot + ground = circuit to load.

sounds like you got it.