New Turbo Guy Here

BoostnLSX

Registered
Well have a 04 stage 2 and about to build a motor is it worth the switch to a 08-11 motor and ecu ? or just stoke it and port the 04 head?
thanks guys
 
Welcome to the oRg, I am sure the builders will be along shortly to answer your question. There is a guy on here that did a swap for a gen II motor, ecu, and guage cluster. It was a cool build. :welcome:
 
Here is a pic
IMG_10512.jpg
 
Do none of the above.

Degree Stock Cams, Install Wossner turbo pistons and spacer plate, valve job on head, carrillo or wossner rods...A good tune and some seat time.. :thumbsup:
 
Do none of the above.

Degree Stock Cams, Install Wossner turbo pistons and spacer plate, valve job on head, carrillo or wossner rods...A good tune and some seat time.. :thumbsup:

well cams are degree and spacer plate is in use.. just don't wanna build the motor twice...
 
If wanting a little extra then get an 80+ crank for a little more stroke
Also stock cams are good till you get into the huge turbos
 
OK lots a ways to go LOL.. well i know now i should have stated my goals of around 550hp. I do see a plus of going to the 08 crank!! but seeing i have the stage2 stuff now was it worth the change to the 08+ stuff and run ECU editor..
 
Back
Top