neep help identifying a sensor please

[mustangracer42]

Fellas, I need some help identifying what a particular sensor is. It's on the left side of my 2000 busa as you sit on the bike. It's under the tank and mounted to the frame near a bunch of vacuum lines. It has three wires coming into it. One is red, 1 is green w/ white stripe and the other looks black and "might" have an orange stripe. The denso numbers on the top are 81A0 0079800-4990 5V. It has what looks like a vacuum nipple sticking out the bottom but I can't find a loose vacuum line anywhere near it. Is it supposed to have something hooked to it.

Thanks for helping a noobie out.

Jeremy

 

[roadthing]

I have an '08, and I am not seeing what you are. How about trying an online microfiche: Ron Ayers 2000 Hayabusa fiche

Click on the links on the left to find the component in question.

 

[heykenny]

sounds like the atmospheric pressure sensor... and no the nipple doesn't have anything attached to it... the hole in the sensor is open to outside air pressure

 

[turbobusa2000]

sounds like the atmospheric pressure sensor...   and no the nipple doesn't have anything attached to it...  the hole in the sensor is open to outside air pressure

+1 That is correct

 

[DR1300R]

sounds like the atmospheric pressure sensor... and no the nipple doesn't have anything attached to it... the hole in the sensor is open to outside air pressure

+1 That is correct

+2

 

[Pipefighter248]

+3
Not necessary either.
Removed it when I put a turbo on, but left it off after.