Need suspension help

[Bruce B]

Hi, new to posting on the site.Need help with suspension .My question is what causes the rear tyre on a 08 gen 11 to scrub in the centre while riding on a normal freeway at average speed of 160km/h.The tyre is a BT56 , suspension setting is rebound out 12 clicks, compression 8 clicks, spring has 7mm thread showing above,tyre pressure is 2.8bars, rider weight is 115 kgs.Sag rear is 32mm with gear.Scrubbing only occurs while riding on the freeway and not in town.Would really appreciate the help unfortunately no pictures avail.I need to sought out problem before fitting new tyre, existing tyre only 1700km with average riding thanx.

 

[rockadaous]

I'm gonna need you to convert all the kgs/kmh to lbs/mph please

check out jinkster thread about setting the suspension. Comes with a full detailed write-up.

https://www.hayabusa.org/forum/maintenance-do-yourself/89876-jinkster-attacks-suspension.html

 

[Bruce B]

Thanx ,will do.

 

[Bruce B]

Went to check out jinkster link ,but it does not mention anything about troubleshooting through tyre wear.conversions: 160km/h =100 miles/hr . 115kg = 253 pounds .2.8bars = 40 psi , do u know of any link or thread that shows various tyre wear pattens ,thanx again.