Jonny Hotnuts
Registered
I have built a hedder and have the turbo mounted but I have a few questions before I continue.
Using a Garrett M24
1. is it ok that the oil dump line out of the unit is not pointing 100% down (mine is at about 45 deg. down)
2. Can I use an adjustable boost regulator (like)
http://store.summitracing.com/partdet....iew=sku
from the vacume line out of the TB's to the wastegate diapharam on that is stock on the turbo?
3. The m24 has water lines in and out.....is there a known method to get coolant to the unit....a kit maybe?
4. Where do I get the oil cooler relocator kit and the hoses to run the oil lines to the turbo?
Using a Garrett M24
1. is it ok that the oil dump line out of the unit is not pointing 100% down (mine is at about 45 deg. down)
2. Can I use an adjustable boost regulator (like)
http://store.summitracing.com/partdet....iew=sku
from the vacume line out of the TB's to the wastegate diapharam on that is stock on the turbo?
3. The m24 has water lines in and out.....is there a known method to get coolant to the unit....a kit maybe?
4. Where do I get the oil cooler relocator kit and the hoses to run the oil lines to the turbo?