Hi guys,i have a problem with my Gen ii,i suspect the output shaft,please advize.
-Riding the bike,when u tap on and tap off the excellerator,it feels like the drive chain is very slack,it feels like the output shaft has too much rotational play in it.bike selects gears fine,no chain slack,clutch is fine,cush rubbers are fine,no shudder,no noises.Stripped the clutch side , hub etc,all is fine .But when i rotated the clutch shaft i measured approx. 70 degrees of rotational play on the shaft, is this normal.
When riding the bike the slack feeling in the gearbox feels similar to a front wheel drive car with a worn engine mounting.I actually doent enjoy riding,a scary feeling waiting for something to snap.Please share your opinions.If it is the output shaft or clutch shaft,then what could be the problem with it?it feels like too much play between the output and clutch shafts.
Thanx so much
-Riding the bike,when u tap on and tap off the excellerator,it feels like the drive chain is very slack,it feels like the output shaft has too much rotational play in it.bike selects gears fine,no chain slack,clutch is fine,cush rubbers are fine,no shudder,no noises.Stripped the clutch side , hub etc,all is fine .But when i rotated the clutch shaft i measured approx. 70 degrees of rotational play on the shaft, is this normal.
When riding the bike the slack feeling in the gearbox feels similar to a front wheel drive car with a worn engine mounting.I actually doent enjoy riding,a scary feeling waiting for something to snap.Please share your opinions.If it is the output shaft or clutch shaft,then what could be the problem with it?it feels like too much play between the output and clutch shafts.
Thanx so much