Need HELP - Anyone have a PCV (02-07) that they can look at for me?

Road Weazel

Registered
I'm a bone-head and could use a little assist. I'm doing the 32 bit upgrade on my '99 and am in the process of rewiring the PCV to new connectors. I removed the pins from the PCV 'female' plug (with the male pins) and should have written down which wires went into which slots. As I said,
'BONE-HEAD'...
:banghead:
Does anyone have a PCV for a Gen-1 that they could put eyes on and tell me which pins go in which slot?
Thanx for helping the slow kid over here...
Weazel
5DA12AFE-2FF1-4E8D-811E-A3DFAB09D195-1090-000001C8D1338A54_zps3e7efc34.jpg
 
Last edited by a moderator:
This is how I think it is wired up, but if anyone can confirm or deny this I'd appreciate it.
Thanx again,
Weazel
B42C548E-A40F-4B9E-87EA-5A8794CCED03-1090-000001D1C860BEA6_zps665ff837.jpg


59D4F170-8917-4B94-8E08-D93CD6732D10-1090-000001D0D10F8CB7_zpsa1c4534b.jpg
 
Last edited by a moderator:
I found this picture on the Internet for a Gen1 PCV connector. I can make out 7 of the wires. As per our conversation, I can look at the one on my busa but I won't be able to until Sunday. If you're still not squared away by that time let me know.

PCVMaile.jpg
 
I'd like to say "Thanx!" to So-Cal Blur for all the help. Between my pic, his pic and his drawing I was able to figure this out.
Thanx for all the help!
:beerchug:
Weazel
 
Back
Top