Need a little help ASAP

shady16

Registered
I just did a complete rebuild on my busa motor. and i recon i cought a severe case of the dumb A$$ because i cant remember nor does the service manual show where this one little bolt goes. It has to be a bolt to an oil passage because it has a rubber washer behind it. There are 2 more exactly like it on the motor. One is directly above the oil filter to the left. The other is on the front left side of the head ( or cylinder 1).  It has a 5mm allen head and has a brownish colored coating on it. Someone please refresh my mind of where it goes.  


                                                      Thanks,
                                                           Shady
 
i know the oil jets are back in. And i was about 100% sure all the oil galley bolts are in. I might just have to flip it over on the engine stand and take the oil pan back off and double check everything. I was just hoping someone would jump right out and know exactly where it went. HAHA. Thanks for the info.
 
thumb_up.gif
 
Back
Top