My weekend at the 1/4 mile in Iceland // Gen 1 Busa

GSX-R//Iceland

Registered
Went to the 1/4 mile this weekend to try out the busa. This was the first time i went since i had a crash in a 1/8th mile event only about a month ago(June 16th), broke both hands so im still healing. Decided to take it pretty easy.

Only ran a 9.8@144mph but had a lot of fun and good to get back out there after the crash

Did not strap the bike
Stock motor
Murray sidewinder no baffle
No airfilter
pc3 usb
lowered rear
bolton extensions
Shinko hookup
i weigh 200lbs suited

Also had a 45 shot nitrous on it but when i tried to spray it the clutch would slip. which was weird since it didnt slip when i was launching the bike. It was a new stock clutch with stock springs, and welded slipper.



couple pics and one video



9389803092_412cb4130a_b.jpg


9389846162_5c46ab5a46_b.jpg


9386852417_d3450d14e4_b.jpg


9387077639_b3f1862ac2_b.jpg
 
Last edited by a moderator:
Get your tucked in lower and keep that front down . Good time for stock though
 
Get your tucked in lower and keep that front down . Good time for stock though

thanks yeah i usually launch it much harder, last time out i got a 1.42 60ft, but i was taking it easy now since my right hand hasnt healed completely since the crash

You need stiffer clutch springs and a clutch slave support

i just installed the clutch slave support before the weekend. But i didnt have it before and i was getting 1.42 - 1.55 60fts and it did hold.
I also just received my stiffer springs. Will be instaling them this week
 
Back
Top