My lights on the dash don’t work

[SmokeKingOfCali99Hayabusa]

My lights in the background of my dash doesn’t work. Like the neutral/FL/turn signals/headlight /all the needles work. The lights just where I have arrows don’t work. Like at night I can’t see how fast I’m going. I can only see the needles moving

 

[Sandow]

My lights in the background of my dash doesn’t work. Like the neutral/FL/turn signals/headlight /all the needles work. The lights just where I have arrows don’t work. Like at night I can’t see how fast I’m going. I can only see the needles moving

View attachment 1608181

Interesting.......!
So?

 

[fallenarch]

I bet @c10 knows the answer to this one. Looks like a blown LED or bulb.

 

[SmokeKingOfCali99Hayabusa]

I bet @c10 knows the answer to this one. Looks like a blown LED or bulb.

Yes please anything helps bro

 

[fallenarch]

he'll see that when he comes online.

 

[SmokeKingOfCali99Hayabusa]

he'll see that when he comes online.

Alrighty 10/4

 

[c10]

Ok so the board of gen one I'm unfamiliar with . However I think it's still LED .
To replace a burned out led on a board
Generally requires a solder station with a solder sucker . The LEDs are small .
This might be best handled by Scoot @ Bluegauges.com

 

[fallenarch]

If you need a quick temp fix, you could get a small light and shine it away from you at the dash so you can see it. Or better yet, use the GPS on your cell to get speed.

 

[ottafish]

Or...

If the bike splutters to a stop = low/no fuel - time to find a gas station
If everyone is passing you = too slow - speed up some
If you're passing everyone else gradually = probably a good speed
If you're passing everyone fast = over the speed limit - maybe slow down
If you're passing everyone really fast = way above limit - keep going till you red & blues in your mirror
If the bike is screaming at you = time to change up a gear
If the bike is jerking = time to change down a gear

And if the bike smells kinda funny = low/empty water and/or oil - park it and wait till daylight.

You're welcome

 

[Kiwi Rider]

Ok so the board of gen one I'm unfamiliar with . However I think it's still LED .
To replace a burned out led on a board
Generally requires a solder station with a solder sucker . The LEDs are small .
This might be best handled by Scoot @ Bluegauges.com

Yes they are LED . . but they may not be blown, first thing to check is if they have power up to them, or dry solder joints or bad connections at the plug.
But as you said Bryan, probably best to have them looked at by Bluegauges

 

[SmokeKingOfCali99Hayabusa]

Yes they are LED . . but they may not be blown, first thing to check is if they have power up to them, or dry solder joints or bad connections at the plug.
But as you said Bryan, probably best to have them looked at by Bluegauges

Okay awesome thank you bro

 

[SmokeKingOfCali99Hayabusa]

Ok so the board of gen one I'm unfamiliar with . However I think it's still LED .
To replace a burned out led on a board
Generally requires a solder station with a solder sucker . The LEDs are small .
This might be best handled by Scoot @ Bluegauges.com

Alrighty thank you

 

[Mathewrussell52]

Soldering the tiny leds in and out is not hard I did mine with a $3 soldering iron.

 

[SmokeKingOfCali99Hayabusa]

Soldering the tiny leds in and out is not hard I did mine with a $3 soldering iron.

Ohhh okay, thanks bro

 

[Mathewrussell52]

I changed mine to blue. I’ll have to see if I can find the thread I posted all details to.

 

[SmokeKingOfCali99Hayabusa]

I changed mine to blue. I’ll have to see if I can find the thread I posted all details to.

View attachment 1608234

That looks really good. Okay bro thanks

 

[SmokeKingOfCali99Hayabusa]

Ok so the board of gen one I'm unfamiliar with . However I think it's still LED .
To replace a burned out led on a board
Generally requires a solder station with a solder sucker . The LEDs are small .
This might be best handled by Scoot @ Bluegauges.com

Hey my brother do you have a video replacing a hydraulic clutch master cylinder, and changing out the clutch lever?.

 

[Mathewrussell52]

That looks really good. Okay bro thanks

How to change the color of you gauges lights...bye orange | Maintenance and Do-It-Yourself

Know this thread is old but just did this and wanted to share some info. 1. I got bulbs from lighthouse LED. 1210 smd led here is a link. Order extra they are cheap you will melt a few and might have a few not work...

www.hayabusa.org

 

[SmokeKingOfCali99Hayabusa]

How to change the color of you gauges lights...bye orange | Maintenance and Do-It-Yourself

Know this thread is old but just did this and wanted to share some info. 1. I got bulbs from lighthouse LED. 1210 smd led here is a link. Order extra they are cheap you will melt a few and might have a few not work...

www.hayabusa.org

Thank you!

 

[c10]

Hey my brother do you have a video replacing a hydraulic clutch master cylinder, and changing out the clutch lever?.

View attachment 1608985

No not @ this time .