more help pleeeease :-)

[edsmini]

hi guys,

well, im stuck again, a couple of the plugs have got me baffled. the connector on the left i beleive to be for the speed sensor?

i assume the picture below is for the oil pressure sensor and rear brake pedal switch?

much appreciated for any help :-)

Ed

 

[GoldenChild]

Search for a manual so you can get a pinout and it's color coded..

 

[MLSDUKE1]

The one on the left IS your speed sensor...... The one on the right might be for fuel? Do I see an alternator in that top pic?

 

[edsmini]

yeh i have fitted an alternator, ive searched the net and i think the one on the right is for a pair valve solenoid? does that sound correct? and the wire beside the oil sensor wire seems to be for a side stand relay and indicator? this thing has got my head pickled :-(

Ed

 

[MLSDUKE1]

Seems legit. Now, is this for a Busa or a car?

 

[edsmini]

for a car im afraid,
im scared that i get slagged on here for taking a hayabusa to pieces for my project ???

Ed

 

[MLSDUKE1]

It WILL work! Just take your time!

 

[dadofthree]

Search for a manual so you can get a pinout and it's color coded..

This is your best answer since you might have future questions. The electrical drawings are simple schematics and are easy to use. Best of luck.

 

[kromdom]

This is your best answer since you might have future questions. The electrical drawings are simple schematics and are easy to use. Best of luck.

oh what the hey, here's the link: Suzuki GSX-R 1300 Hayabusa | Service manuals for Suzuki GSX-R Motorcycles

P.S. Your project is most excellent (I have an '11 Justa Clubbie)

 

[edsmini]

well guys, i managed to find a wiring diagram on the net and i printed it off. and as luck would have it, when it printed out over 16 separate pages, i stuck them all together on a large piece of cardboard, so i now have a drawing that is 30 inches x 24 inches so that should be he end of the stupid questions i keep asking.

thanks again to all those who have helped with my questions :-)

i will have more questions relating to TRE sensors etc :-)

Ed

 

[Fireman6615]

The only stupid questions are the ones that are never asked ???

 

[captain]

im scared that i get slagged on here for taking a hayabusa to pieces for my project

No slagging from folks here as long as we get a chance to drive it......

 

[edsmini]

what will happen if i remove the pair valve? will i have to fit a resistor between the 2 wires? the o2 sensor requires a resistor of around 320 ohms but im not sure which 2 wires to bridge with the resistor?

any help appreciated

Ed