mods

[cetrov]

installed the zero gravity sport touring windscreen
heli bars
yosh full race ti exhaust system
16 tooth front sprocket
tre
166.3 horse power on the dyno!

 

[Narcissus]

Wow. Sounds like your cams were degreed right from the factory. I was about 1-2 HP down with a Micron full and the standard map. No idea what it is now with the extras I've done and another 15K miles since the last dyno.

You have a PCII, right?

 

[Knebnr]

4mm over wisco pistons 3mm falicon stroker crank. carillo ti rods. Stage 1 web cams clutch mods Ti force pipe. 217hp 130lbs torque.

 

[Narcissus]

Knebnr, very nice numbers.

That isn't stock bore, is it, and what compression ratio are you running (pump gas?)? I've been thinking of doing a 1360 or 1397 but I'm not sure how it will handle in the twisties/track, since I don't do a lot of strip stuff. Yosh cams on stock bore give 175-180 at best.

 

[MET]

Knebre,
I am also interested in the comp ratio. i am looking to do a 1360 this month. I am looking at just changing the bore and pistons and leaving everything else in the engine stock. I figure that I should take my 171hp to about 185-190hp and keep it streetable.