Looking for wires for Scorpion install

funnyman3000

Registered
I have a Scorpion 500 system I took off my old bike that I'm installing on the Busa today. Need some help locating which wires I'm taping into. I found the wires in the tail for the individual back blinkers, but I need something from the main unit that does both from and back blinkers. Also looking for a main power line that I can use for the kill switch feature.

GEN-1
Black wire – To ground (-).
Grey wire – To turn signal power wire (Left).
Grey wire – To turn signal power wire (Right).
Orange wire – To tail light wire or any other wire that is hot (+) when ignition is “ONâ€￾ (NOTE: this is
an input to the alarm this connection is not designed to flash the tail light).

Color Codes:

Ground (-) Tail Light Left Turn Signal Right Turn Signal

Suzuki Black/White Brown wire Green or Black Grey wire

IMG_0064.jpg


IMG_0065.jpg
 
So it looks like I'm looking for "B" for the left turn signal, and "Lg" for right signal, and "Br" for the constant on tail light.
Looks like the turn signal wire for the front/back splits off at the front of the bike though to the right of the fuze box. I don't think the alarm cables will reach that far. If I tap into a turn signal light in the back of the bike, will it turn on the front ones too or just the back ones?

wiring3.jpg


wiring4.jpg
 
could you just pick up a harness for the Busa so you dont have to splice wires?

By kill do yo mean anti-hijack?
 
Back
Top