Looking for updates

[jwcfbd]

Have you had any luck with Suzuki helping out with the cost to fix your bike?
I dropped my bike off at the shop this morning to figure out why it's burning oil. They're not going to be able to get to it until Fri.

Once I figure something out I'll let everyone know what was going on out there in CA.

 

[Jester0769]

its not lookin good at this moment. the dealer says Im pretty much S.O.L on this one. Mainly because Im the second owner, high mileage and its `99. THAT SUX!!

But I can have it Heli-arced,(weilded) with cases and all for around 400 bucks. Ruff guess from the guy I talked too. I have to take it to him to get a real quote.

Ive just been to busy to swing it by him. I had to fly to Courpus Christi Monday and back monday night. Then today I had to cover a bunch of service calls for work today, Just over 400 miles today. Im hoping to have it looked at by this weekend.

Anybody know a Heli-arc welder in My area thats good at what he does?

 

[jwcfbd]

Man that sucks, good luck

 

[Jester0769]

you got that right, and by the way, I never did think to ask you what your name hear on the board stood for.

 

[jwcfbd]

you got that right, and by the way, I never did think to ask you what your name hear on the board stood for.

JWC my initials FBD make shift abbreviation for my first and favorite car. The Pontiac <span style='color:red'>F</span>ire<span style='color:red'>B</span>ir<span style='color:red'>D</span>

 

[Big O]

Cool, I was wondering too.

 

[jwcfbd]

its not lookin good at this moment. the dealer says Im pretty much S.O.L on this one. Mainly because Im the second owner, high mileage and its `99. THAT SUX!!

But I can have it Heli-arced,(weilded) with cases and all for around 400 bucks. Ruff guess from the guy I talked too. I have to take it to him to get a real quote.

Ive just been to busy to swing it by him. I had to fly to Courpus Christi Monday and back monday night. Then today I had to cover a bunch of service calls for work today, Just over 400 miles today. Im hoping to have it looked at by this weekend.

Anybody know a Heli-arc welder in My area thats good at what he does?

Have you found out anything new yet? Deals Gap is coming up quick.

 

[Jester0769]

should go to the shop either thrusday or friday. I should know something buy tuesday or wensday of next week. From what I have been told, once thay arc it, all I have to do is get the new gears and Ill be off, there not sure about the price yet but thay said it shouldnt be more than 400. THANK GOD!!!! Seca broke my sorry butt.

 

[Doc_Busa]

should go to the shop either thrusday or friday. I should know something buy tuesday or wensday of next week. From what I have been told, once thay arc it, all I have to do is get the new gears and Ill be off, there not sure about the price yet but thay said it shouldnt be more than 400. THANK GOD!!!! Seca broke my sorry butt.

Jester, just break out the plastic and get a big bore kit! Remember, that 1600+cc monster you were talking about... that would be the bomb!

 

[Jester0769]

you got that right!!! a 1622 would get everyones attention. If I dont get it now, Ill get sooner or later!!!!

 

[jwcfbd]

I hope it all works out for you and it is back up and running soon. I just heard from the shop that has my bike and they told me that it is just running very rich. So tomarrow I have to take it to a different shop to get it remapped again

. We'll see what happens.

Remember 8/15-8/17 DEALS GAP

 

[Jester0769]

trust me when I say Im workin on it. I would love to be there thats for sure.

 

[Big O]

I hope it all works out for you and it is back up and running soon.  I just heard from the shop that has my bike and they told me that it is just running very rich.  

Whew! Glad you don't any major probs Jdub!

1622 Jester!

 

[Doc_Busa]

I hope it all works out for you and it is back up and running soon.  I just heard from the shop that has my bike and they told me that it is just running very rich.  So tomarrow I have to take it to a different shop to get it remapped again  

.  We'll see what happens.

 Remember 8/15-8/17 DEALS GAP

No doubt man, your bike was running WAY WAY rich. I was surprised you did not foul plugs... You may be able to find a map on DynoJets web site, or ask around for a good one...

Of course a dynotune would be best.

 

[jwcfbd]

I hope it all works out for you and it is back up and running soon.  I just heard from the shop that has my bike and they told me that it is just running very rich.  So tomarrow I have to take it to a different shop to get it remapped again  

.  We'll see what happens.

 Remember 8/15-8/17 DEALS GAP

No doubt man, your bike was running WAY WAY rich.  I was surprised you did not foul plugs...   You may be able to find a map on DynoJets web site, or ask around for a good one...

Of course a dynotune would be best.

I just got it back from the shop last week after getting it remapped. Now it pulls like a fright train.

What a difference.

 

[Big O]

Fright Train is right!

 

[jwcfbd]

Jester
My PM isn't working so I hope you get this.

The next Deals Gap trip.
My next long weekend is midweek Oct 15-17 Wed-Fri. or Nov 7-9 Fri- Sun.  Rotating off days are always fun like that.
Jim